The Edit wall function allows you to adjust drawn walls in your plan. For example, you may receive corrected measurements which requires updating your room.
In the example below, a drawn Wall as partition wall is edited, and then updated using the Trim walls function:
- Click to highlight the wall you want to edit.
- Click Edit wall in the Assistant box to the right.
- Hover over the correct quadrant you want to edit. The arrows indicate in which directions the wall will be adjusted. When correct, click to select.
- In the Edit wall window, you can adjust the following dimensions using sliders, or entering a specific figure into the text box:
Wall length
Increase or reduce the wall length.
Displacement in length
Move the entire wall along the red arrow.
Displacement
Move the wall along the green arrow.
When the wall has been adjusted, click OK.
Trim walls
Once your wall has been edited, there may be an overlap, protrusion or a poor connection with another wall.
With the edited wall selected, click Trim walls in the assistant box to quickly update an overlapped wall. Remember to click the renew floor box in the bottom-right to update the 3D plan view after making edits:
Please note the following:
- When one wall protrudes over another, it will not trim the protrusion.
- When there is a poor connection, using Trim walls can increase the length of the wall to correct it.