Innoplus allows you to change the finish of articles even after placing them in a plan. This can be done either for an individual item, all items of one manufacturer in a group or all items of one manufacturer in a plan at the same time.
Before changing the finish of an item or group check the Settings of the Articles in the current plan by going to Settings > Article > Design-change over. The Design-change over can be set in three different ways:
- Article – Only the selected item will be changed
- Article Group – All items from that manufacturer in the group will be changed
- Scene – All items in the plan from that manufacturer will be changed
Changing the finish
- Choose the wanted Design-change over in the Settings.
- Highlight the item or group to be changed by clicking on it in the plan.
- Right click the item/group and choose Change design from the object menu.
- Choose the design you want from the Variants/textures window and click OK.
Note: If Design-change over is set to scene, this will define all attributes of the items in the room including hinges; if an article is available in both left and right handing. To avoid this, if possible, use the attributes of a double door unit.
Related articles
How to change finishes and colours using drag and drop
How to use the exchange colour/décor function
How to hide and show articles or objects